Analysis of SiC grain size variation and NaCl concentration on the corrosion susceptibility of AA1070 aluminium matrix composites

Analysis of SiC grain size variation and NaCl concentration on the corrosion susceptibility of AA1070 aluminium matrix composites

Analysis of the impact SiC grain size at 10% wt. on the corrosion resistance of AA1070 aluminium matrix composites was studied in Cl− anion containing dilute H2SO4 solution. Studies were performed with potentiodynamic polarization and open circuit potential (OCP) measurement. Optical microscopic studies were performed on the corroded matrix composites. Results show that the corrosion...
 
Published at Cogent Engineering
Volume 5
Published in 2018
 
 
visit (https://doi.org/10.1080/23311916.2018.1473002)
 
 
Roland Tolulope Loto and Phillip Babalola
Loto Roland Tolulope » A passionate corrosion engineer with strong background in electrochemical corrosion behavior and inhibition of metallic alloys in virulent conditions. Evaluation of the use of organic inhibiting compounds in addition to their mechanism of inhibition, passive film formation and pitting corrosion control view full profile
Loto Roland Tolulope
 
Other publications by this author (view profile)
 
 
Electrochemical Studies Of Mild Steel Corrosion Inhibition In Sulfuric Acid Chloride By Aniline
 
Pitting Corrosion Evaluation Of Austenitic Stainless Steel Type 304 In Acid Chloride Media
 
Corrosion Inhibition Of Thiourea And Thiadiazole Derivatives : A Review
 
Electrode Potential Monitoring of Effect of Plants Extracts Addition on the Electrochemical Corrosion Behaviour of Mild Steel Reinforcement in Concrete.
 
Synergistic Effect of Tobacco and Kola Tree Extracts on the Corrosion Inhibition of Mild Steel in Acid Chloride.
 
Inhibition Effect of Extracts of Carica Papaya and Camellia Sinensis Leaves on the Corrosion of Duplex (α β) Brass in 1M Nitric acid.
 
Corrosion Polarization Behaviour of Type 316 Stainless Steel in Strong Acids and Acid Chlorides
 
Effect of Aminobenzene Concentrations on the Corrosion inhibition of Mild Steel in Sulphuric acid
 
Effect of P-Phenylediamine on the Corrosion of Austenitic Stainless Steel Type 304 in Hydrochloric Acid
 
Inhibition Effect of N, N'-Dimethylaminoethanol on the Corrosion of Austenitic Stainless Steel Type 304 in 3M H2SO4
 
Electrochemical Corrosion Resistance Evaluation of Ferritic Stainless Steel in HCl
 
Effect of Dextrin and Thiourea Additives on the Zinc Electroplated Mild Steel in Acid Chloride Solution
 
Corrosion Inhibitive Behaviour of Camellia Sinensis on Aluminium Alloy in H2SO4
 
Inhibition Effect of Vernonia amygdalina Extract on the Corrosion of Mild Steel Reinforcement in Concrete in 3.5M NaCl Environment
 
An Investigation Of Carburization Resistance Performance Of Ethylene Furnace Tube Alloys
 
Corrosion and plants extracts inhibition of mild steel in HCl
 
Effect Of Neem Leaf (Azadirachita Indica) Extract On The Corrosion Inhibition Of Mild Steel In Dilute Acids
 
Pyrimidine Derivatives As Environmentally-Friendly Corrosion Inhibitors: A Review
 
Corrosion Resistance Of Austenitic Stainless Steel In Sulphuric Acid
 
Effects Of Nicotiana Tobaccum Extract Additive On The Quality Of Electroplating Of Zinc On Mild Steel
 
Corrosion Resistance Behaviour of Duplex (αB) Brass in Nitric Acid Concentrations
 
Corrosion inhibition of 2-amino-5 ethyl-1, 3, 4-thiadiazole on mild steel in hydrochloric acid
 
Electrochemical Studies of the corrosion inhibition effect of 2-amino-5-ethyl-1,3,4-thiadiazole on low carbon steel in dilute sulphuric acid
 
Inhibition effect of butan-1-ol on the corrosion behaviour of austenitic stainless steel (type 304) in dilute sulphuric acid
 
Inhibition Effect of 2-Amino, 5-Ethyl- 1, 3, 4 Thiadiazole on the Corrosion of Austenitic Stainless Steel Type 304 in Dilute Sulphuric Acid
 
Electrochemical influence of Aminobenzene on the pitting corrosion behaviour of Type 304 stainless steel in dilute sulphuric acid
 
Effect of Manihot Esculenta C. Leaf Extract Additive on the Zinc Electro plating on Mild Steel in Acid Chloride Solution
 
Inhibition effect of Vernonia amygdalina extract on the corrosion of mild steel reinforcement in concrete in 0.2 M H2SO4 Environment
 
Adsorption and Inhibitive Properties of Camellia Sinensis for Aluminium Alloy in HCI
 
Inhibition Effect of Deanol on Mild Steel Corrosion in Dilute Sulphuric Acid
 
Pitting Corrosion Inhibition of 304 Austenitic Stainless steel by 2-Amino-5-ethyl-1,3,4-thiadiazole in Dilute Sulphuric Acid
 
Adsorption and Inhibitive Properties of Camellia Sinensis for Mild Steel in 0.5M HCl and 0.8M H2SO4
 
Electrochemical effect of 1, 4-diaminobenzene on the corrosion inhibition of mild steel in dilute acid media
 
Inhibition effect of phenylamine on the corrosion of austenitic stainless steel type 304 in dilute sulphuric acid
 
Electrochemical studies of the corrosion inhibition property of Rosmarinus officinalis on mild steel in dilute sulphuric acid
 
Electrochemical Studies of the Inhibition Effect of 2-Dimethylaminoethanol on the Corrosion of Austenitic Stainless Steel Type 304 in Dilute Hydrochloric Acid
 
Effect of Vernonia amygdalina extract and zinc oxide inhibitor on the corrosion of mild steel reinforcement in concrete in 0.2M H2SO4 Environment
 
Electrochemical corrosion resistance and susceptibility of 12Cr martensitic stainless steel in H2SO4
 
Electrochemical and thermodynamic investigation of benzenamine as corrosion inhibitor of austenitic stainless steel (type 304) in hydrochloric acid solution
 
Electrochemical corrosion resistance and inhibition behaviour of martensitic stainless steel in hydrochloric acid
 
Pitting corrosion evaluation and inhibition of stainless steels: A review
 
Electrochemical corrosion behaviour of austenitic stainless steel (type 304) in dilute hydrochloric acid solution
 
Synergistic effect p-phenylenediamine and n,n diphenylthiourea on the electrochemical corrosion behaviour of mild steel in dilute acid media
 
Inhibition Effect of N, N'-Dimethylaminoethanol on the Pitting Corrosion Austenitic Stainless Steel Type 304
 
Corrosion Polarization and K2Cr2O7 Inhibition Behaviour of Martensitic Stainless Steel in H3PO4 and H3PO4 + 3.65 % NaCl Environments
 
Effect of zinc oxide on the corrosion inhibition of mild steel embedded in concrete in 3.5% NaCl solution
 
Inhibition effect of 2-amino-5-ethyl-1, 3, 4-thiadiazole on corrosion behaviour of austenitic stainless steel type 304 in dilute HCl solution
 
Inhibition Effect of Zinc Oxide on the Electrochemical Corrosion of Mild Steel Reinforced Concrete in 0.2M H2SO4
 
Corrosion inhibition effect of Allium sativum extracts on mild steel in HCl and H2SO4
 
Inhibition effect of garlic extracts on the corrosion of alpha brass in nitric acid
 
Inhibition Effect of Butan-1-Ol on the Pitting Corrosion of Austenitic Stainless Steel (Type 304)
 
Corrosion Resistance Studies of Austenitic Stainless Steel Grades in Molten Zinc-Aluminum Alloy Galvanizing Bath
 
Corrosion Inhibition Effect of N, N’-diphenylthiourea on the Electrochemical Characteristics of Mild steel in Dilute Acidic Environments
 
Adsorption and Corrosion inhibition properties of thiocarbanilide on the electrochemical behaviour of high carbon steel in dilute acid solutions
 
A potential attenuation equation for cathodically polarized pipelines and risers
 
Corrosion of Aluminum Alloy Metal Matrix Composites in Neutral Chloride Solutions
 
Electrochemical analysis of the corrosion inhibition properties of 4-hydroxy-3-methoxybenzaldehyde on low carbon steel in dilute acid media
 
Corrosion inhibition properties of the synergistic effect of 4-Hydroxy-3-methoxybenzaldehyde and hexadecyltrimethylammoniumbromide on mild steel in dilute acid solutions
 
Corrosion Resistance Study of Heat Treated 420 Martensitic Stainless Steel and 316 Austenitic Stainless Steel in Dilute Acid Concentrations
 
Effect of Allium Sativum Extracts on the Corrosion and Inhibition of α- Brass in HCl
 
Study of the corrosion behaviour of S32101 duplexand 410 martensitic stainless steel for applicationin oil refinery distillation systems
 
Corrosion inhibition properties of the combined admixture of thiocarbanilide and hexadecyltrimethylammoniumbromide on mild steel in dilute acid solutions
 
Corrosion inhibition effect of Allium Cepa extracts on mild steel in H2SO4
 
Corrosion Behaviour of Heat Treated 1060 Aluminium in Dilute Acid Solutions
 
Corrosion Inhibition Effect of Allium Cepa Extracts on Mild Steel in HCl
 
Inhibition Studies of Rosmarinus Officinalis on the Pitting Corrosion Resistance 439LL Ferritic Stainless Steel in Dilute Sulphuric Acid
 
Effect of Benzamide on the Corrosion Inhibition of Mild Steel in Sulphuric Acid
 
Study of the synergistic effect of 2-methoxy-4-formylphenol and sodium 4 molybdenum oxide on the corrosion inhibition of 3CR12 ferritic steel 5 in dilute sulphuric acid
 
Comparative Analysis of the Synergistic Effect of Sodium Molybdenum Oxide and Vanillin on the Corrosion Inhibition of 3CR12 Ferritic Stainless Steel and High Carbon Steel in Dilute Hydrochloric Acid
 
Corrosion inhibition studies of the combined admixture of 1,3-diphenyl-2-thiourea and 4-hydroxy-3- methoxybenzaldehyde on mild steel in dilute acid media
 
Potentiodynamic Polarization Behavior and Pitting Corrosion Analysis of 2101 Duplex and 301 Austenitic Stainless Steel in Sulfuric Acid Concentrations
 
Study of the Corrosion Resistance of Type 304L and 316 Austenitic Stainless Steels in Acid Chloride Solution
 
Electrochemical Corrosion Characteristics of 439 Ferritic, 301 Austenitic, S32101 Duplex and 420 Martensitic Stainless Steel in Sulfuric Acid/NaCl Solution
 
Evaluation of the synergistic properties of 4-hydroxy-3-methoxybenzaldehyde and 1, 4-diaminobenzene on the electrochemical corrosion behaviour of mild steel in dilute acid solutions
 
Anti-corrosion performance of 1, 3 benzothiazole on 410 martensitic stainless steel in H2SO4
 
Corrosion Inhibition Performance of the Synergistic Effect of Rosmarinus officinalis and 5-Bromovanillin on 1018 Carbon Steel in Dilute Acid Media
 
Corrosion behaviour of S43035 ferritic stainless steel in hot sulphate/chloride solution
 
Inhibition effect of Phenylamine on the Corrosion of Austenitic Stainless Steel (Type 304) in dilute sulphuric acid
 
Pitting Corrosion Resistance and Inhibition of Lean Austenitic Stainless Steel Alloys
 
Anti-corrosion performance of the synergistic properties of benzenecarbonitrile and 5-bromovanillin on 1018 carbon steel in HCl environment
 
Corrosion inhibition effect of non-toxic α-amino acid compound on high carbon steel in low molar concentration of hydrochloric acid
 
Corrosion polarization behaviour and inhibition of S40977 stainless steel in benzosulfonazole/3 M H2SO4 solution
 
Surface coverage and corrosion inhibition effect of Rosmarinus officinalis and zinc oxide on the electrochemical performance of low carbon steel in dilute acid solutions
 
Inhibition Studies of the Synergistic Effect of Rosemary oil and Zinc oxide on S41003 Ferritic Steel Corrosion in Dilute Sulphuric and Hydrochloric Acid Solutions
 
Comparative analysis of electrochemical corrosion behavior and inhibition of 2101 duplex and 301 austenitic stainless steel in 4-cyanobenzene/6M H2SO4 solution
 
Synergistic Effect of Benzonitrile and Benzothiazole on the Corrosion Inhibition of 316 Stainless Steel in 6M HCl Solution
 
Anti-corrosion Properties of Rosemary Oil and Vanillin on Low Carbon Steel in Dilute Acid Solutions
 
Corrosion polarization behavior and microstructural analysis of AA1070 aluminium silicon carbide matrix composites in acid chloride concentrations
 
Electrochemical analysis of the corrosion inhibition effect of trypsin complex on the pitting corrosion of 420 martensitic stainless steel in 2M H2SO4 solution
 
Corrosion Behaviour of Heat Treated Duplex (αβ) Brass in Nitric Acid
 
Investigation of the Localized Corrosion Resistance of 4044 Aluminum Alloy in Acid Chloride and Neutral Chloride Solutions
 
Anti-corrosion properties of the symbiotic effect of rosmarinus officinalis and trypsin complex on medium carbon steel.
 
Electrochemical analysis of the corrosion inhibition properties of L-leucine and trypsin complex admixture on high carbon steel in 1 M H2SO4 solution
 
Comparative study of the pitting corrosion resistance, passivation behavior and metastable pitting activity of NO7718, NO7208 and 439L super alloys in chloride/sulphate media
 
Comparative assessment of the synergistic combination of ricinus communis and rosmarinus officinalis on high-carbon and P4 low-carbon mold steel corrosions in dilute acid media
 
Effect of combined trisaminomethane and hexadecyltrimethyl ammonium bromide (HDTAB) inhibitors on mild steel in nitric acid.
 
Synergistic combination effect of green organic derivatives on the corrosion inhibition of mild steel in simulated seawater
 
Effect of alumina nano-particle size and weight content on the corrosion resistance of AA1070 aluminum in chloride/sulphate solution
 
Potentiodynamic polarization studies of the pitting corrosion resistance and passivation behavior of P4 low carbon mold steel in chloride and acid chloride solution
 
Corrosion inhibition properties of the combined admixture of essential oil extracts on mild steel in the presence of SO42− anions
 
Synergistic combination effect of salvia officinalis and lavandula officinalis on the corrosion inhibition of low-carbon steel in the presence of SO42- and Cl- containing aqueous environment.
 
Effect of elevated temperature on the corrosion polarization of NO7718 and NO7208 nickel alloys in hot acid chloride solution.
 
Electrochemical analysis of the pitting corrosion inhibition performance of essential oil extracts on P4 low alloy steel in H2SO4 solution
 
Potentiodynamic polarization and gravimetric evaluation of corrosion of copper in 2M H2SO4 in absence and presence of ammonium dichromate as an inhibitor.
 
Investigation of the influence of SiC content and particle size variation on the corrosion resistance of Al-SiC matrix composite in neutral chloride solution
 
Effect of SO42− and Cl− anionic attack on the localized corrosion resistance and morphology of 409 ferritic stainless steel.
 
Influence of White Aluminum Dross on the Corrosion Resistance of Reinforcement Carbon Steel in Simulated Concrete Pore Solution
 
Data on the microstructure and passivation behavior for austenitic nickel-chromium (NO7718) and nickel-chromium-aluminum-iron (NO7208) nickel alloys in corrosive media
 
Electrochemical and microstructural analysis of the corrosion inhibition characteristics of atlas cedar essential oil extracts on mild steel in dilute H2SO4 and C6H8O7 electrolytes.
 
Evaluation of the synergistic combination effect of four chemical compounds on the corrosion inhibition of carbon steel in dilute acid solutions.
 
Data on the corrosion inhibition effect of non-toxic organic derivatives on high carbon steel in dilute acid media.
 
Effect of heat treatment on the localized corrosion resistance of S32101 duplex stainless steel in chloride/sulphate media.
 
Inhibition Effect of Essential Oil Extracts on the Corrosion Inhibition of Mild Steel in Chloride–Sulphate Media
 
Effect of azadirachta indica oil extracts of on the corrosion inhibition and passivation of low carbon steel in 2.5 M C6H8O7 acid solution
 
Corrosion in crude distillation overhead system: A Review
 
Effect of SiC particle additions on the corrosion resistance, thermodynamic stability and surface morphology of Mg–Al alloy in sulphate and chloride media.
 
Evaluation of the localized corrosion resistance of 316L austenitic and 430Ti ferritic stainless steel in aqueous chloride/sulphate media for application in petrochemical crude distillation units.
 
Electrochemical analysis of SiC composite additions at 7.5% weight content on the corrosion resistance of monolithic aluminium alloy in sulphate-chloride solution
 
Corrosion resistance of low SiC particle variation at low weight content on 1060 aluminum matrix composite in sulfate-contaminated seawater
 
Evaluation of cathodic protection of mild steel with magnesium anodes in 0.5 M HCL
 
Comparative assessment of the pitting corrosion resistance and passivation behaviour of 439L ferritic and 904L austenitic stainless steels for application in extreme process environments.
 
Corrosion resistance and morphological deterioration of 316Ti austenitic, GX4CrNiMo16-5-1 martensitic and 444 ferritic stainless steels in aqueous corrosive environments.
 
Data on the corrosion inhibition properties of centrimonium bromide with thiocarbanilide and with vanillin on low carbon steel in dilute acid media
 
Response Surface Analysis of the Compressive Strength of Self-Compacting Concrete Incorporating Metakaolin
 
Corrosion Inhibition By Essential Oil Extracts: A Sustainable Method Of Controlling Carbon Steel Degradation
 
Electrochemical Data on the Effect of Extreme Temperatures on 2101 Duplex Steel Corrosion Performance in Chloride-Sulphate Environment
 
Effect of heat treatment processes on the localized corrosion resistance of austenitic stainless steel type 301 in chloride/sulphate solution
 
Electrochemical Analysis of the Anti-corrosion Properties of Benzonitrile Compound on Quenched 420 Martensitic Steel in Strong Aqueous Environment
 
Sustainable need in manufacturing industry in Nigeria toward quality, policy and planning
 
Inhibition studies of the synergistic effect of chemical compounds on 3CR12 ferritic steel corrosion in acid solutions
 
Electrochemical study of the inhibition effect of cow bone ash on the corrosion resistance of mild steel in artificial concrete pore solution
 
Cathodic protection performance evaluation of magnesium anodes on mild steel corrosion in 0.5 M H2SO4 and seawater environments
 
Data on the Corrosion Resistance and Polarization Behaviour of Lean Austenitic and Ferritic Stainless Steels in Neutral Chloride Media
 
Potassium Gluconate Inhibition of α-Brass Corrosion in 1 M HNO3
 
Synergistic effect of sage and jojoba oil extracts on the corrosion inhibition of mild steel in dilute acid solution
 
Potentiodynamic Polarization and Gravimetric Evaluation of Corrosion of Copper in 2M H2SO4 and its inhibition with Ammonium Dichromate
 
Inhibition effect of the combined admixture of l-leucine and 5- bromovanilin on the corrosion of P4 low carbon mold steel
 
Effects of Lavandula and Ricinus Ϲommunis Oil as Inhibitors of Mild Steel Ϲorrosion in HCL and H2SO4 Media
 
Evaluation of the localized corrosion resistance of 430Ti ferritic steels as possible replacement for the conventional 409 ferritic steel in automobile exhaust mufflers
 
Corrosion inhibition of mild steel in acidic medium by butyl Alcohol